Features: 1, ST03 energy bicomponent glue machine main base pump, curing agent, the proportion of the pump, the base material pump lifting system, adjusting than the structure, rubber mixing system, pneumatic system, hydraulic system and electrical system. 2, the base material pump, the pump and the ratio of curing agents are using a special high-pressure pump piston, two-way equivalent for the material, the base material pump driven by a hydraulic system, air motor driven by a curing agent pump. Supplemented by two pressurized feed pressure plate, and fully guarantee delivery of high viscosity fluid filled, pressed into the base material, and increased to high pressure, pressed into the curing agent and pressurized, and then sent to the ratio of pump, solid tone than the body by the flow regulation, two groups were also fed into mixer, mix arrived at the crowded plastic gun. 3, the curing agent filters the exit and feed mixers are equipped with high pressure at the valve, pressure relief washed plastic, mixer, on a one-way valve, not only more uniform mixing glue, and prevent the two groups were channeling each other, the channel curing congestion. 4, the lift system uses a manually rotating valve control, the ratio of the two groups were adjusted by adjusting the slider on the swing pole position to change, when the required scale, tighten the nut can.